E&P How to Level with Extra Blocks

In case there is ever a time where you need a bit of extra support of blocks. 

This video shows you how to use blocks to help levelling.

Step 1: If you see this message you will need blocks to help you reach a level position. The message is shown when one of the jacks or corner steadies has reached the end of its stroke.

Step 2: Locate the jack or corner steady that looks like it is fully extended.

Step 3: Retract all jacks and corner steadies.

Step 4: Place a block or piece of marine plywood with a surface area larger than the footplate and position is under the jack or corner steady. Then auto-level.

Step 5: Watch the jack/corner steady that reached the end of its stroke and ensure it sits squarely on the block or plywood.

Step 6: Your system should now auto-level. If the warning message is displayed again, repeat the process for other jacks or corner steadies.

Information supplied from ep-hydraulics.co.uk

While we have made every attempt to ensure that the information on these pages has been obtained from reliable sources, Adventure Leisure Vehicles Ltd is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information on this page is provided “as is”, with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance and fitness for a particular purpose. In no event will Adventure Leisure Vehicles Ltd including employees be liable to you or anyone else for the decision made or action taken in reliance on the information on these pages or for any consequential, special or similar damages.