E&P How to Recalibrate

Should you ever need to reset the level point of your vehicle, follow these steps. 

Step 1: Engage the handbrake and lower the nose of the caravan using the jockey wheel.

Step 2: Place a spirit level on the floor so you can see it from the outside.

Step 3: Manually level the vehicle using the spirit level as a guide.

Step 4: When you are happy the vehicle is level, go into the settings by selecting the cog icon.

Step 5: Enter the pin code 0000 to access the settings menu.

Step 6: From the menu on the left, select CALIBRATION

Step 7: Then select the first option; LEVEL - Store the current position as level.

Step 8: You will be advised that the current position will be used as 'level' and asked if you want to proceed. Select 'YES' from the options.

Step 9: A message will appear saying 'Calibration successful' and your new level is set.

Information supplied from ep-hydraulics.co.uk

While we have made every attempt to ensure that the information on these pages has been obtained from reliable sources, Adventure Leisure Vehicles Ltd is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information on this page is provided “as is”, with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance and fitness for a particular purpose. In no event will Adventure Leisure Vehicles Ltd including employees be liable to you or anyone else for the decision made or action taken in reliance on the information on these pages or for any consequential, special or similar damages.